445nm - 50W blue diode Laser jerin MK don sarrafa kayan aiki
Siffofin samfur:
Ikon MK jerin blue diode Laser shine 50W, tare da babban aminci da ƙarancin farashi, ya wuce sa'o'i 2000 na gwajin tsufa na dogon lokaci, wannan jerin ya dace da aikace-aikacen m farashin kamar soldering.
Blue diode Laser yana da fa'idar high photon makamashi a fagen sarrafa karfe, kuma yana da halaye na high sha kudi kuma babu spatter a sarrafa na jan karfe da sauran karfe kayan.Abu na biyu, yana da fa'idodin da ba za a iya maye gurbinsa ba a fagen lantarki na 3C da waldawar batirin lithium.
BWT shine kamfanin da ke da cikakkiyar layin samfurin Laser mai shuɗi a cikin Sin, tare da kewayon tsayin 405-1470nm.Muna da mafita don tsawon zango daban-daban.Don soldering da filastik waldi, akwai: 976/915/808nm blue diode Laser kayayyakin, kazalika da tsarin-matakin kayayyakin.
Babban Siffofin
Tsawon tsayi: 445 nm
Ƙarfin fitarwa: 50W
200µm / 0.22NA
Aikace-aikace:
Sarrafa kayan aiki
3D Bugawa
Haskaka
Umarnin don amfani
- Da fatan za a haɗa fil zuwa wayoyi ta hanyar solder maimakon amfani da soket lokacin aiki na yanzu ya fi 6A.
- Ya kamata wurin siyarwa ya kasance kusa da tsakiyar fil.Soldering zafin jiki ya zama ƙasa da 260 ℃ da kuma lokaci ya fi guntu fiye da 10 seconds.
- Tabbatar cewa ƙarshen fitarwa na fiber yana da tsabta sosai kafin aiki na Laser.Bi ka'idojin aminci don guje wa rauni lokacin sarrafawa da yanke fiber.
- Yi amfani da wutar lantarki akai-akai don gujewa hauhawar halin yanzu yayin aiki.
- Dole ne a yi amfani da diode Laser bisa ga ƙayyadaddun bayanai.
KYAUTA KYAUTA
| Ƙayyadaddun bayanai (25°C) | Alama | Naúrar | Mafi ƙarancin | Na al'ada | Matsakaicin | |
| Bayanan gani (1) | Ƙarfin fitarwa na CW | Po | w | 50 | - | - |
| Tsawon Tsayin Tsakiya | λc | nm | 445± 10 | |||
| Spectral Nisa(FWHM) | △λ | nm | - | 5 | - | |
| Bayanan Lantarki | Ƙarfin Lantarki-zuwa-Kayan gani | PE | % | - | 25% | - |
| Aiki Yanzu | Iop | A | - | 3.5 | - | |
| Matsakaicin Yanzu | Ita | A | - | 0.3 | - | |
| Aiki Voltage | Vop | V | - | 60 | - | |
| Bayanan fiber | Mahimmin Diamita | Dcore | μm | - | 200 | - |
| Diamita mai ɗorewa | Dclad | μm | - | 220 | - | |
| Buɗe Lamba | NA | - | - | 0.22 | - | |
| Tsawon Fiber | Lf | m | - | 1.0 | - | |
| Fiber Loose Tubing Diamita | - | mm | 3mm karfe jaket | |||
| Mafi ƙarancin Lankwasawa Radius | - | mm | 60 | - | - | |
| Kashe Fiber | - | - | SMA905 | |||
| Wasu | ESD | Vesd | V | - | - | 500 |
| Yanayin Ajiya (2) | Tst | °C | -20 | - | 70 | |
| Gubar Siyar da Wuta | Tls | °C | - | - | 260 | |
| Lokacin Siyar da Jagoranci | t | dakika | - | - | 10 | |
| Yanayin Yanayin Aiki (3) | Sama | °C | 15 | - | 35 | |
| Danshi mai Dangi | RH | % | 15 | - | 75 | |
(1) Bayanan da aka auna ƙarƙashin fitarwar aiki a 50W@25°C.
(2) Ana buƙatar yanayi mara ƙarfi don aiki da ajiya.
(3) Yanayin aiki da aka ayyana ta hanyar kunshin.Karɓar kewayon aiki shine 15°C ~ 35°C, amma aikin na iya bambanta.
